Custom Cycling Jersey Printing in Malaysia
We manufacture and print custom cycling jerseys for clubs, race teams, and corporate riders across Malaysia. Every order goes through full dye-sublimation at our own Ampang factory, so your design, sponsor logos, and team colors are built into the fabric — not stuck on top. Send us your artwork or club colors, and we return a free 3D mockup before we cut a single piece.
What Counts as a Real Custom Cycling Jersey
A genuine custom cycling jersey is not a plain jersey with a logo pressed on later. It's a garment cut from performance fabric, printed edge-to-edge with your own design through dye-sublimation, and assembled with flatlock seams so it doesn't chafe on a three-hour ride. At 4NA Printing, that's the only standard we work to. We handle the vector artwork, the color matching, the fabric cutting, and the stitching in-house, which is why we can call ourselves a custom cycling wear factory rather than a print shop that resells someone else's blanks.
Whether you're outfitting a full peloton for race day or ordering a small batch for a weekend riding group, the jersey needs to survive Malaysia's heat, hold its color wash after wash, and fit the way a cycling kit should — close to the body, without pulling at the shoulders or bunching at the lower back.
Why "Factory-Direct" Matters
We cut, print, and sew on-site in Pandan Indah, Ampang. That means no reseller markup, no third-party production delays, and one team accountable for your entire order — from vector file to the box that arrives at your door.
Printing Methods We Use for Custom Cycling Jerseys
Different jerseys call for different techniques. We run all four methods under one roof, so we recommend whichever one actually fits your design, budget, and quantity — not whichever one we happen to offer.
Full Dye-Sublimation Best for full-jersey designs
Ink is heat-infused directly into the fibres of the fabric, so the print never cracks, peels, or fades — even under direct tropical sun. This is our standard method for full sublimation cycling team uniforms, covering the entire jersey, sleeves, and side panels in unlimited colors.
Heat Transfer Vinyl (HTV) Best for small logos and numbers
HTV presses a cut vinyl graphic onto the fabric. It works well for adding a sponsor emblem or a single race number to a jersey without redoing the full sublimation file, especially for smaller add-on orders.
Screen Printing Best for large flat-color runs
For bulk orders with one to three solid colors, screen printing keeps unit cost down without sacrificing durability. It suits corporate charity ride kits where budget matters more than a photo-realistic gradient.
Custom Embroidery Crest & patch stitching
For a raised, premium finish, we stitch club crests, sponsor patches, and captain badges directly onto the jersey or a detachable patch. Popular for club presidents' jerseys and anniversary editions.
Color Matching System Pantone & CMYK vector
We match your club colors against Pantone (PMS) references and build the artwork in a CMYK color profile, so the jersey that arrives is the same shade your team rides in every year — not a rough approximation.
3D Digital Mockup Included, before production
Before we cut fabric, you receive a 3D digital mockup showing the jersey from front, back, and side. Nothing goes to the sublimation press until you sign off on the mockup in writing.
Fabric Options Built for Malaysia's Heat
Malaysia's climate is hot and humid nearly year-round, so fabric choice affects comfort as much as design does. We stock both everyday and race-grade fabrics, and we'll tell you honestly which one fits your riding conditions and budget.
| Fabric | Weight / Feel | Best For |
|---|---|---|
| Eyelet | 160 GSM, mesh texture, breathable | Everyday club rides, budget team kits |
| Interlock | 160 GSM, smooth double-knit | Sharper print clarity, corporate rides |
| Mini Eyelet | 160 GSM, finer mesh weave | Balanced airflow and print sharpness |
| Kain Diamond | Premium, textured stretch | Racing kits, competitive peloton wear |
| Ultron | Premium, high compression stretch | Aero-fit race jerseys |
| RJ Fabric | Premium, smooth performance knit | Long-distance Audax jerseys |
| Pin Dot | Premium, textured micro-perforation | Enhanced ventilation for hot routes |
| Kain Lycra | Premium, four-way stretch | Sleeveless tanks, athletic-cut fits |
Jersey Types, Collars & Fit Options
A cycling jersey lives or dies on fit and small design decisions. We cut men's, women's, and kids' cycling jerseys on separate patterns, not a single unisex block resized up or down, so the shoulder seams and torso length actually sit right on the rider.
- Collar styles: round neck, V-neck, polo collar, retro collar, Mandarin, NFL, reglan, stub, loop, insert, open stub, Barbos, and Kiwi collars.
- Cut options: standard racing cut, sleeveless tank, and relaxed athletic cut for club touring rides.
- Team identity: club crest or sponsor emblem placement, rider name and roster numbering, front zip color-matching.
- Design direction: full-graphic team kits or a minimalist cycling jersey with a clean block-color layout and a single crest — both print equally well through sublimation.
Custom Cycling Clothing, Not Just Jerseys
Beyond the jersey itself, we print matching bib shorts, arm sleeves, and gilets for full cycling kits design orders. If your club needs the whole set to match, tell us at the quote stage and we'll size the fabric and pricing for the complete kit, not just the top.
From Design File to Finished Jersey
Send Your Design or Club Colors
Share existing artwork, a rough sketch, or just your club's Pantone colors over WhatsApp or email.
We Build Vector Artwork & CMYK Profile
Our design team converts your brief into print-ready vector artwork, matched to your color codes.
Free 3D Mockup for Approval
You review the jersey in 3D from every angle and request changes before anything is printed.
Sublimation, Cutting & Flatlock Sewing
Once approved, we print, cut, and sew in-house with flatlock seams and reinforced pockets.
Quality Check & Nationwide Delivery
Every jersey is checked for print alignment and stitching before it ships across Malaysia.
Built for Malaysia's Cycling Culture
We've supplied jerseys to Kelab Basikal chapters, amateur racing pelotons, corporate charity rides, and long-distance Audax riders across the Klang Valley and beyond. Whether your group rides every weekend around KL or trains for a 200km Audax route, we understand the fit and fabric a real riding schedule demands.
Cycling Clubs & Kelab Basikal
Full team kit orders with consistent crest placement and roster numbering across every size.
Amateur Racing Teams
Race-grade fabrics like Ultron and Kain Diamond for compression fit and heat dissipation.
Corporate Charity Rides
Bulk screen-print or sublimation kits with sponsor logos, sized for mixed-experience riders.
Audax & Long-Distance Riders
Reinforced pocket seams and breathable RJ or Pin Dot fabric for multi-hour routes.
Weekend Group Riders
Low MOQ from 10 pieces, so smaller riding groups can still order matching kits affordably.
Nationwide Delivery
We ship custom cycling jersey orders to Kuala Lumpur, Selangor, Johor, Sabah, and Sarawak.
An Affordable, Accountable Alternative to National Chains
We've operated as a knitwear manufacturing and apparel decoration factory in Ampang since 2012. Over 14 years, we've built a customer base that keeps coming back — our repeat order rate sits at 98%, largely because we answer quickly, quote honestly, and stand behind the stitching after the jersey ships.
- Market-competitive pricing without compromising on fabric or print quality.
- Low MOQ of 10 pieces, so smaller clubs aren't forced into oversized minimums.
- After-sales support if a print or seam issue turns up post-delivery.
- Eco-conscious sublimation ink and production processes.
- One factory handling design, printing, and stitching — no outsourced steps.
Where We Print
No.11, Jalan 6/4, Taman Commercial Park, Pandan Indah, Ampang 55100, Kuala Lumpur. Open Monday to Saturday, 9AM to 9PM, with same-day WhatsApp response for quote requests.
4NA Printing menyediakan perkhidmatan percetakan jersi basikal custom di Kuala Lumpur dan seluruh Malaysia. Kami mengeluarkan jersi basikal menggunakan kaedah sublimasi penuh, kuantiti minimum (MOQ) hanya 10 keping, serta mockup 3D percuma sebelum proses cetakan bermula. Sesuai untuk kelab basikal, pasukan lumba amatur, dan program riadah korporat di seluruh Lembah Klang.
Custom Cycling Jersey — Common Questions
What is the minimum order quantity for a custom cycling jersey?
Our production MOQ for custom cycling jerseys is 10 pieces per design. A single jersey is only available as a walk-in, in-store order at our Ampang factory, not through bulk production runs.
How much does a custom cycling jersey cost in Malaysia?
Pricing depends on fabric grade, printing method, and order quantity. Basic Eyelet fabric with full sublimation costs less per piece than premium fabrics like Kain Diamond or Ultron, and larger orders bring the per-piece price down. We confirm an exact figure once we know your fabric, design coverage, and quantity.
Which fabric works best for cycling jerseys in Malaysia's climate?
For everyday club rides, Interlock or Mini Eyelet (160 GSM) balance breathability and print sharpness well. For racing kits, premium Kain Diamond, Ultron, or Kain Lycra add stretch, heat dissipation, and UPF 50+ sun protection.
How long does it take to produce custom cycling jerseys?
Once you approve the 3D mockup, standard production runs 7 to 14 working days depending on quantity and fabric. Rush production is available for teams working toward a fixed race date — ask us to confirm a rush timeline before you order.
Can I order just one cycling jersey, or only in bulk?
Single-piece jerseys are available for in-store, walk-in customers only. For custom-designed, sublimated jerseys built from your own artwork, our production MOQ is 10 pieces per design.
Do you provide a 3D mockup before printing?
Yes. Every custom cycling jersey order includes a free 3D digital mockup built from your artwork, logo, and color codes. We only cut and print after you approve that mockup in writing.
What is the difference between sublimation and heat transfer for cycling jerseys?
Full dye-sublimation infuses ink into the fabric fibres, so the design never cracks, peels, or fades, and it covers the entire jersey including sleeves and side panels. Heat transfer vinyl sits on top of the fabric and suits smaller logos, names, or numbers on a limited budget, but it isn't built for full-jersey, all-over designs.
Can you add sponsor logos, names, and race numbers to cycling jerseys?
Yes. We build sponsor emblems, club crests, rider names, and roster numbers directly into your vector artwork so they sublimate as part of the jersey, not as a sticker on top. We also offer embroidered crest and patch stitching for a raised, premium finish.
Do you make cycling jerseys for women and kids as well as men?
Yes. We cut men's, women's, and kids' cycling jerseys on separate patterns for an accurate athletic fit, and we offer sleeveless tank versions and adjustable sizing for junior riders within the same team design.
Get Your Custom Cycling Jersey Quote Today
Send us your club colors, artwork, or a reference jersey, and we'll return a free 3D mockup along with pricing based on your fabric and quantity. No obligation until you approve the design.
4NA Printing SDN BHD
No.11, Jalan 6/4, Taman Commercial Park,
Pandan Indah, Ampang 55100, Kuala Lumpur
WhatsApp: +6016-379 0276
Email: info@4naprinting.com
Hours: Mon–Sat, 9AM–9PM